Masonry Reinforcement
Movement in masonry structures may occur for a variety of reasons. The result is often cracking at the weakest points. Strength may be restored by the installation of masonry reinforcement.
Masonry reinforcement consists of deformed stainless steel bar or helical stainless steel wire which is set into epoxy or cementitious grout. The helical wire is generally used in brickwork repair and may be 6mm or 8mm in diameter. Solid deformed bar is available from 6mm diameter upwards for more major repairs.
Left: Preparing bed joint using dust-free cutter
Right: Resin grout installed to receive stainless steel reinforcement
Helical reinforcement being installed in bed joint
Re-inforcement bedded in resin grout
The reinforcement may be installed in short lengths to stitch across cracks, or may be used in continuous lengths to form virtual “beams” in the brickwork. It is important to ensure that there is sufficient bond of the reinforcement into stable sections of the structure.
In order to preserve the aesthetic appearance of the building Falcon pay particular attention to making good the surface of the brickwork, pointing or render to match as closely as possible to the surrounding surfaces.
Download Printable PDF
Back to top | 
Next: Movement Joints
Services
- » Cementitious Sock Anchors
- » Diamond Drilling
- » Remedial Wall Ties
- » Tie Bars And Straps
- » Masonry Reinforcement
- » Movement Joints
- » Resin Bonding And Anchors
- » Traditional Repairs
Case Studies
© Falcon Structural Repairs Ltd 2008